Rezgéscsillapító TA
Material: Co-Polyester Elastomer. The profile damper TA are maintenance-free, self-contained damping elements. Due to the degressive damping characteristics it provides a very high energy absorption at the beginning of the stroke. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The space-saving, compact shape has been realized in all sizes ranging from Ř12 mm up to Ř62 mm and is installed very simply and quickly with the supplied, specially shaped mounting bolt. The TA-Series has been specially developed to provide maximum stroke at a minimum mounting space in the capacity range from 2 Nm up to 280 Nm. The life cycle is up to 20 times longer than for urethene dampers, up to ten times longer than for rubber and up to five times longer than for steel springs. Overload Capacity: For one cycle it is possible to exceed the W3 rating by 40%. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 670 N to 5800 N. Temperature Range: -40°C to +90°C. Energy Absorption: 26% to 45%. Material Hardness: Shore 40D Mounting: in any position Impact Velocity range: up to max. 5 m/s Mounting Bolt Torque: M3: 2 Nm. M4: 4 Nm. M5: 6 Nm. M6: 10 Nm. M12: 85 Nm. M16: 210 Nm. On request: special strokes, characteristics, spring rates, sizes and materials.