Árajánlatkérő kosár

Jelenleg az árajánlatkérő kosara üres

Termékek

Profile Damper TS, Axial, Soft Damping

Material: Co-Polyester Elastomer. The profile dampers TS are a maintenance-free, self-contained damping elements. Due to the almost linear damping characteristics it provides very smooth energy absorption along with minimum reaction loads on the machine. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The life cycle is up to 20 times longer than for urethene dampers and up to ten times longer than for rubber springs. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 533 N to 23,500 N. Temperature Range: -40°C to +90°C. Energy Absorption: 35% to 64%. Material Hardness: Shore 40D. Mounting: in any position. Impact Velocity range: up to max. 5 m/s. Mounting Bolt Torque: M4: 2 Nm. M5: 4 Nm. M6: 6 Nm. M12: 50 Nm. M16: 120 Nm. On request: special strokes, characteristics, spring rates, sizes and materials.  
Azonosító Rajz letöltése Type Bemerkung W31)[Nm/Hub] W3max2)[Nm/Hub] Max. Travel[mm] D[mm] d1[mm] d2[mm] L1[mm] L2[mm] M[Thread] Weight[g]
69118200 CAD 82-44 NEU 419 620 44 82 110 75 16 84 M16 346
69119000 CAD 90-47 NEU 580 778 47 90 124 84 16 92 M16 490
69119500 CAD 107-56 NEU 902 966 56 107 147 100 16 110 M16 733